View source for Adding words to openbios

How to add “words” to the OpenBIOS Dictionary using the C language. 

In this example, we are going to implement a forth “word” in C. There are two arrays that need to be looked at. One is located in the file openbios-devel/kernel/bootstrap.c. The other array is located in the file openbios-devel/kernel/forth.c. The two arrays are used to map a C function to a forth word.

The array in bootstrap.c is where the name of the forth word would go. The array in forth.c is where the corresponding C function would go. When adding to these arrays, make sure to add at the end of the list. This ensures everything continues to run smoothly. 

Here is an example on adding to the dictionary. Say you want to add a word called dog. You can define the C function like this:

 static void dog(void)
 {
        printk(“bark bark!”);
 }

Add this function to a .c file. Knowing which file to pick can involve a lot of trial and error. In this example, we will use the file openbios-devel/kernel/forth.c. Be sure to include the static keyword before in the function declaration, or OpenBIOS won’t build successfully.

Now we add the word dog to the end of the forth word list. Open the file bootstrap.c, then find the array called wordnames. When adding the word dog, be sure the name of the word is surrounded in double quotes. Here is how the array should look:

 /* the word names are used to generate the prim words in the
      dictionary. This is done by the C written interpreter.
 */
 
 static const char *wordnames[] = {
 	"(semis)", "", "(lit)", "", "", "", "", "(do)", "(?do)", "(loop)",
 	"(+loop)", "", "", "", "dup", "2dup", "?dup", "over", "2over", "pick", "drop",
 	"2drop", "nip", "roll", "rot", "-rot", "swap", "2swap", ">r", "r>",
 	"r@", "depth", "depth!", "rdepth", "rdepth!", "+", "-", "*", "u*",
  	"mu/mod", "abs", "negate", "max", "min", "lshift", "rshift", ">>a",
 	"and", "or", "xor", "invert", "d+", "d-", "m*", "um*", "@", "c@",
 	"w@", "l@", "!", "+!", "c!", "w!", "l!", "=", ">", "<", "u>", "u<",
 	"sp@", "move", "fill", "(emit)", "(key?)", "(key)", "execute",
 	"here", "here!", "dobranch", "do?branch", "unaligned-w@",
 	"unaligned-w!", "unaligned-l@", "unaligned-l!", "ioc@", "iow@",
 	"iol@", "ioc!", "iow!", "iol!", "i", "j", "call", "sys-debug",
 	"$include", "$encode-file", "(debug", "(debug-off)", “dog”     // <------- insert here
 };


Next we add the C function name to the end of the function list. Open the file forth.c and add dog (no quotes this time) to the end of the list. You may want to add a comment to the right indicating the word this c function corresponds to, but this isn’t necessary.

  
 	sysdebug,			/* sys-debug */
 	do_include,			/* $include */
 	do_encode_file,		        /* $encode-file */
 	do_debug_xt,		        /* (debug  */
 	do_debug_off,		        /* (debug-off) */
 	dog  				/* dog */                   //<--------  insert here
 };

Now you should be ready to build OpenBIOS. Go to the shell and set the current directory to the root level of openbios-devel folder:

 	cd openbios-devel

Set the architure you wish to build openbios for (amd64 is used in this example):

 	./config/scripts/switch-arch amd64

Then start building OpenBIOS:

 	make

Once these commands are done, you need to be able to execute OpenBIOS. In this example we will be using the unix program version of OpenBIOS. 

We run the program like this:
	
 	./obj-amd64/openbios-unix ./obj-amd64/openbios-unix.dict

We should then be greeted by the OpenBIOS Banner:

 Welcome to OpenBIOS v1.0 built on Mar 9 2010 21:06
   Type 'help' for detailed information
 
 [unix] Booting default not supported.
 
 0 > 
 
Type dog at the prompt and see what it says:

 0 > dog 
 bark bark! ok
 0 > 

Congratulations, you have just taken your first step to improving OpenBIOS.